Dish Array CoDR

America/Vancouver
Penticton, CA

Penticton, CA

Roger Norrod (NRAO)
Description
The Dish Array CoDR is the review of the DVP and associated work conducted at element level during the Concept Phase. The review panel members are: 1) Roger Norrod (NRAO)(retd.) (Chairman) 2) Trevor Bird (Antengenuity/CSIRO) 3) Peter Dewdney (SPDO) 4) Bob Plemel (SED Systems)(retd.) 5) Tony Willis (NRC‐HIA) The CoDR will be conducted to evaluate: A) The overall progress in the Domain B) Whether the technical adequacy obtained during the concept phase is at a sufficient level of maturity to allow the Dish Array Element to move into the next phase. C) Whether all Dish Array Element aspects of the project have been covered and where gaps exist, whether adequate measures have been identified to address the shortcomings. The expected outcome of the review is the establishment of the Dish Array concept baseline. The Review Panel is requested to consider the following questions: 1. Are the requirements complete, and sufficiently defined for this stage of the project? 2. At the concept level, is the element/subsystem presented capable of meeting the requirements? 3. Have interfaces to other aspects of the system been adequately identified and defined at this stage of the program? 4. Are the options proposed to be carried forward credible and are the presented data and information in support of each option credible? 5. Have all the necessary aspects of the specific element/subsystem been considered and addressed during the review or are there gaps and/or shortcomings? 6. Does the risk profile appear reasonably detailed and correctly assessed for this stage of the program? 7. Do the stated risk controls and proposed mitigations appear reasonable and executable? 8. Is the overall plan (including the identification of the tasks, effort, resources, costs, schedule and risk mitigation needed) to complete the subsequent project phases credible? These questions are to be within the context of SKA1 but with consideration of extensibility to SKA2, and the plans to correlate with the evolving project environment
    • 09:00 09:15
      Welcome and Overview of the CoDR

      Presenter: P Dewdney (SPDO)

      Presentation
    • 09:15 09:45
      Overview of SKA Phase 1 science and system requirements

      Presenters: M. Huynh (SPDO) and J. Lazio (SPDO)

      Presentation
    • 09:45 10:05
      System hierarchy and Dish Array context

      Presenter: P. Dewdney (SPDO)

      Presentation
    • 10:05 10:25
      Overview of the PEP phase of SKA

      Presenter: P. Dewdney (SPDO)

      Presentation
    • 10:25 10:45
      Coffee break 20m
    • 10:45 11:05
      Dish Array requirements

      Presenter: P. Dewney (SPDO) (for N. Roddis (SPDO))

      Presentation
    • 11:05 12:45
      Dish concepts
      • 11:05
        Addressing SKA requirements with axi-symmetric optics 20m
        Presenter: J. Pragt (ASTRON)
        Presentation
      • 11:25
        Addressing SKA requirements with offset Gregorian optics 20m
        Presenter: L Baker (TDP)
        Presentation
      • 11:45
        Description of the DVA1 concept and how it addresses SKA requirements 1h
        Presenters: G. Lacy (DRAO) and M. Flemming (TDP)
        Presentation 1 - Intro
        Presentation 2 - Reflector
        Presentation 3 - Mount
        Presentation 4 - Feeds & Support
    • 12:45 13:30
      Lunch 45m
    • 13:30 15:15
      Dish concepts (continued)
      • 13:30
        DVA1 dish concept logistical engineering 15m
        Presenter: G. Lacy (DRAO)
        Presentation
      • 13:45
        DVA1 dish concept risks and their mitigation 15m
        Presenter: G. Hovey (DRAO)
        Presentation
      • 14:00
        DVA1 dish concept cost estimates and plans to proceed in the PEP phase 15m
        Presenter: G. Hovey (DRAO)
        Presentation
      • 14:15
        Description of the NRF dish concept and how it addresses SKA requirements 1h
        Presenter: L.J. du Toit (EMSS/NRF)
        Presentation
    • 15:15 15:35
      Coffee break 20m
    • 15:35 16:20
      Dish concepts (continued)
      • 15:35
        NRF dish concept logistical engineering 15m
        Presenter: A. Loots (NRF)
        Presentation
      • 15:50
        NRF dish concept risks and their mitigation 15m
        Presenter: A. Loots (NRF)
        Presentation
      • 16:05
        NRF dish concept cost estimates and plans to proceed in the PEP phase 15m
        Presenter: A. Loots (NRF)
        Presentation
    • 16:20 18:00
      Tour of DRAO laboratories
    • 08:30 09:00
      Review panel closed session
    • 09:00 10:20
      Single pixel feed payloads concepts
      • 09:05
        Introduction to single pixel feed payloads 10m
        Presenter: P. Dewdney (SPDO) (for N. Roddis SPDO))
        Presentation
      • 09:15
        Description of corrugated conical horn feed and OMT concepts and how they address SKA requirements 20m
        Presenter: B. Imbriale (TDP)
        Presentation
      • 09:35
        Description of wide band feed concepts and how they address SKA requirements 30m
        Presenter: B. Imbriale (TDP) (Material included in presentation above)
      • 10:05
        Dewar and cryogenics concepts (inc. reliability and maintenance) 15m
        Presenter: P. Dewdney (SPDO) (for N. Roddis SPDO))
        Presentation
      • 10:05
        LNA options and how they address SKA requirements (Cancelled) 15m
        Presenter: L. Baker (TDP)
    • 10:20 10:40
      Coffee break 20m
    • 10:40 11:25
      Single pixel feed payloads concepts (continued)
      • 10:40
        SPF payload risks and their mitigation 25m
        Presenter: P. Dewdney (SPDO) (for N. Roddis SPDO))
        Presentation
      • 11:05
        Initial SPF payload cost estimates and plans for the next phase (Cancelled) 15m
        Presenter: L. Baker (TDP)
    • 11:05 11:25
      SPF Receiver concepts
      • 11:05
        SPF Receiver requirements 20m
        Presenter: M. Bowen (CSIRO)
        Presentation
    • 11:25 12:25
      Phased Array Feed concepts
      • 11:25
        Description of PAF concepts and how they address SKA requirements 15m
        Presenter: C. Jackson (CSIRO)
        Presentation
      • 11:40
        Description of feed array concepts 45m
        Presenter: S. Hay (CSIRO)
        Presentation
    • 12:25 13:30
      Lunch 1h 5m
    • 13:30 14:45
      Phased Array Feed concepts (continued)
      • 13:30
        Description of PAF receiver and backend concepts 45m
        Presenters: R. Gough (CSIRO) and G. Hampson (CSIRO)
        Presentation
      • 14:15
        PAF logistical engineering (and risks) 15m
        Presenter: M. Bowen (CSIRO)
        Presentation
      • 14:30
        PAF costs and plans for the next phase 15m
        Presenter: C. Jackson (CSIRO)
        Presentation
    • 14:45 15:45
      Dish concepts (continued)
      • 14:45
        Description of the thermoplastic axi‐symmetric dish concept and how it addresses SKA requirements 1h
        Presenter: R. van den Brink (ASTRON)
        Presentation
    • 15:45 16:00
      Coffee break 15m
    • 16:00 16:45
      Dish concepts (continued)
      • 16:00
        Thermoplastic axi‐symmetric dish concept logistical engineering 15m
        Presenters: J. Pragt (ASTRON) and R. van den Brink (ASTRON) (Material included in presentation above)
      • 16:15
        Thermoplastic axi‐symmetric dish concept risks and their mitigation 15m
        Presenters: J. Pragt (ASTRON) and R. van den Brink (ASTRON) (Material included in presentation above)
      • 16:30
        Thermoplastic axi‐symmetric dish concept cost estimates and plans to proceed in the PEP phase 15m
        Presenters: J. Pragt (ASTRON) and R. van den Brink (ASTRON) (Material included in presentation above)
    • 18:30 21:00
      Review dinner (Theo's Restaurant)
    • 08:30 09:00
      Review panel closed session
    • 09:00 10:15
      Dish concepts (continued)
      • 09:00
        Description of the Chinese dish concepts and how they address SKA requirements 1h
        Presenter: Dr. Biao Du (NAOC)
        Presentation
      • 10:00
        Chinese dish concepts logistical engineering 15m
        Presenter: Dr. Biao Du (NAOC)
        Presentation
    • 10:15 10:35
      Coffee break 20m
    • 10:35 11:20
      Dish concepts (continued)
      • 10:35
        Chinese dish concepts: risks and their mitigation 15m
        Presenter: Dr. Biao Du (NAOC)
        Presentation
      • 10:50
        Chinese dish concepts: cost estimates and plans to proceed to the PEP phase 30m
        Presenter: Dr. Biao Du (NAOC)
        Presentation
    • 11:20 12:20
      Summary of risks, costs and plans

      Presenter: P. Dewdney (SPDO) (for N. Roddis SPDO))

      Presentation - Summary 1: Risks
      Presentation - Summary 2: Costs
      Presentation - Summary 3: Plans
    • 12:20 13:05
      Lunch 45m
    • 13:05 14:05
      Review panel closed session
    • 14:05 15:05
      Initial feedback from review panel

      Review Panel Chair

    • 15:05 15:15
      Concluding remarks

      P. Dewdney (SPDO)